A pair of Final 3900 loudspeakers in a warm living room at dusk, with a view over the water

The Final 3000 series

Ready to Configure.

Full range from a single film, without a woofer, from a panel of around 20 kg. Configured with your own amplifier, or by your dealer.

Arrange a listen Ask Maarten

Ask Maarten

Ask the man
who designs them.

A technical question that is not answered here? Send it to Maarten Smits. Difficult and highly specific questions are welcome; selected questions and answers will appear on this site.

Send Maarten your question

The three models side by side

The Final 3200, Final 3300 and Final 3900 side by side
The model	Final 3200	Final 3300	Final 3900
Height	176 cm	204 cm	204 cm
Width	45 cm	45 cm	72 cm
Depth, including base	40 cm	40 cm	40 cm
Placement	Floorstanding	Floorstanding	Floorstanding
Sensitivity	88 dB / 2.83 V at 1 m	88 dB / 2.83 V at 1 m	88 dB / 2.83 V at 1 m
Impedance	Nominal 4 Ω	Nominal 4 Ω	Nominal 4 Ω
Recommended amplifier	50 to 150 W per channel	50 to 150 W per channel	50 to 150 W per channel
Versions	Final 3200, Final 3230, Final 3240	Final 3300, Final 3330, Final 3340	Final 3900, Final 3930, Final 3940
Low frequencies	Final 3200Full-range panel Final 3230Subwoofer Final 3240Two subwoofers	Final 3300Full-range panel Final 3330Subwoofer Final 3340Two subwoofers	Final 3900Full-range panel Final 3930Subwoofer Final 3940Two subwoofers

Compare all the models

01 / The promise

Full range
from a single film.

Our full-range models reach deep bass from the film alone, without a woofer, from a panel of around 20 kg. Other full-range electrostatic loudspeakers that go this deep are often more than 2.5 m tall and weigh around 100 kg each.

01
One film, the whole range.
Voices, instruments and bass come from one surface, without a transition between drivers.
02
The filter is printed in.
The frequency division is printed into the stator itself. The only extra part in the panel is a single capacitor.
03
The same from every seat.
Narrow strips spread the treble like a much smaller source, so the stereo image stays stable across the whole sofa, sitting or standing.

02 / The models

The facts,
per model.

Sensitivity, impedance, amplification and placement: the values you need to plan a system.

Final 3200

Full-range, floorstanding.

Full-range electrostatic sound in a considered floorstanding form.

Height × width × depth: 176 × 45 × 40 cm
Sensitivity: 88 dB / 2.83 V at 1 m
Impedance: Nominal 4 Ω
Recommended amplifier: 50 to 150 W per channel
From the back wall: 60 to 100 cm
Subwoofers: Final 3230 and Final 3240

Arrange a listen Discover the Final 3200

Final 3300

Full-range, for larger rooms.

A tall, slender full-range electrostatic loudspeaker.

Height × width × depth: 204 × 45 × 40 cm
Sensitivity: 88 dB / 2.83 V at 1 m
Impedance: Nominal 4 Ω
Recommended amplifier: 50 to 150 W per channel
From the back wall: 60 to 100 cm
Subwoofers: Final 3330 and Final 3340

Arrange a listen Discover the Final 3300

Final 3900

The widest Final panel.

A full-range electrostatic panel, 72 cm across.

Height × width × depth: 204 × 72 × 40 cm
Sensitivity: 88 dB / 2.83 V at 1 m
Impedance: Nominal 4 Ω
Recommended amplifier: 50 to 150 W per channel
From the back wall: 60 to 100 cm
Subwoofers: Final 3930 and Final 3940

Arrange a listen Discover the Final 3900

03 / Your system

Amplifier, bass
and room.

What a Final asks of the rest of your system, and of your room.

An ordinary amplifier is enough.

Final panels have a sensitivity of 88 dB and a nominal impedance of 4 Ω. A good amplifier of 50 to 150 W per channel is enough, and modern class D amplifiers drive this load without difficulty.

60 to 100 cm from the wall.

Like every panel that plays to the front and the back, a Final needs some space behind it, but 60 to 100 cm from the back wall is enough and the side walls may be close.